BTM Pin Clamps reduce cost by both accurately locating through datum holes and clamping a part with one device. The PLC45 is a non-locking pin locator clamp designed to clamp through holes or slots.

    Key Specifications

    Hole/Slot Range

    12.5mm – 18mm

    Clamping Force

    578N @ 5.5 BAR [130lbf @ 80PSI)

    Finger Travel

    15mm Total (5mm rotational, 10mm straight line pull down stroke)

    Overall Dimensions

    76.7 (L) x 58.9 (W) x 285.6mm (H)

    Weight

    1.55 – 1.56 kg [3.41 – 3.44 lb] Without Arm

    • Stamping and Press Room
    • Automation
    • Nesting
    • Fixtures and Test Fixtures
    • Switch Package - Mounts in Four Different Orientations
    • (2) 360° Diameter Mounting Locations
    • Manual Drive Option
    • Locating Pin Diameters (13mm or 16mm)
    • G 1/8 or 1/8 NPT Ports
    • DC Switch Package